Daytona Blinds & Shades : U.S. Blinds

2 Inch Horizontal Blinds

Mini Blinds

Vertical Blinds

Cellular Shades

Roman Shades

Roller Shades

Sheer Shades
Woven Wood
Other Hunter Douglas
Top Treatments



ADO Wraps

Free Consultation
Color Lux Advisor
Virtual Decorator
Photo Gallery
Measuring Guide
Lifetime Warranty
Return Policy
Child Safety
About US Blinds
Showroom Locations
Service Area
Specials & Coupons
Site Map

Measuring Guide

No single aspect of the window coverings impacts your satisfaction more than measuring. Accurate measurements are essential!

If you do not feel completely confident taking your own measurements, please take advantage of our free in-home consultation, which includes free measuring with your order. Call 1-800-5330-7744 to set up an appointment or click on the following link for more information.

Free Consultation

Measuring Basics
• Always use a steel tape measure, preferably 3/4" to 1" wide.
• Measure the width first, then the height. Width is listed first when you order the window covering, so it's a good habit to measure it first to help prevent transposing the two measurements.
• Record all measurements immediately after you make them. Don't rely on memory.
• Measure each window separately, even if they appear to be the same size.
• Examine the window opening for potential trouble spots, such as protruding window cranks or handles.

Measuring for Inside Mounts
• Make three measurements for each dimension.
• Measure the window opening width at the top, center, and bottom.
• Measure the window opening height at the left, center, and right.
• Record the smallest width and height measurements, rounding down to the nearest 1/8".
• Measure the window opening on the diagonals. If the two diagonal dimensions are not exactly the same, you may wish to specify an outside mount for optimal privacy and light control.

Inside Mount

Inside Mounting Depth
• Check shade specifications for the minimum inside mounting depth required. If the window covering cannot be fully recessed, please be aware that a certain portion will protrude outside the window opening. Remember to add any extra amount required to clear obstructions such as window latches or cranks to the minimum mounting depth.

Measuring for Outside Mounts
• Measure the desired width and height at the center of the window opening.
• Allow for the recommended overlap for the specific window covering being ordered to minimize light gaps.
• If the window has molding around it and you are not mounting onto the molding, be sure your height measurement allows for the mounting of the shade above the molding.
• When recording your measurements, round them to the nearest 1/8".

Outside Mount

For questions on products or services please e-mail
Serving greater Volusia and Flagler Counties, Florida, including Altamonte Springs, Daytona Beach, De Land, Deltona, Lake Mary,
New Smyrna Beach, Orange City, Ormond Beach, Palm Coast, Port Orange, St. Augustine, Sanford, Titusville, Winter Park and Winter Springs.